Tuesday, October 14, 2008

Nokia unlock secrets and tips


Codes work on only Nokia Mobile Phones..

• Activate Enhanced Full Rate Code (EFR)= *3370# = uses the best sound superiority and talktime is fall my approx 5%.

• Disable Enhanced Full Rate Code (EFR)= #3370# OR *3370# ( Favourite ).

• *#4720# Activate Half Rate Code(HRC) - phone use a lower quality sound but should gain approx 30% more talktime.

• *#4720# Deactivate Half Rate Codec(HRC)

• *#0000# Displays phones software version, Line 1st : Software Version, Line 2nd: Software free Date, Line 3rd : Compression Type. ( Favourite ).

• *#9999# Phones version software if *#0000# doesn’t work.

• *#06# (IMEI) inspection the International Mobile Equipment Identity.

• #pw+1234567890+1# position of Lock Provider (use the "*" button to obtain the "p,w"and "+" symbols).

• #pw+1234567890+2# Status of Network Lock (use the "*" button to obtain the "p,w"and "+" symbols).

• #pw+1234567890+3# Status of Country Lock (use the "*" button to obtain the "p,w"and "+" symbols).

• #pw+1234567890+4# Status of SIM Card Lock (use the "*" button to find the "p,w"and "+" symbols).

• *#147# (vodafone) this lets you make out that who called you last.

• *#21# for check the number that All Calls are abstracted.

• *#1471# ( vodofone) Last call.

• *#2640# print security code.

• *#30# for see the private number.

• *#61# for checking the number that "On No Reply" calls are diverted t

• *#43# for checking the "Call Waiting" status of phone.

• *#62# for checking the number that Divert If notreachable (no service) callsare diverted.

• *#67# for checking the number that "On Busy Calls are diverted.

• *#67705646# clear operator logo on 3310, 3330.

• *#73# Reset phone timer, game score.

• *#746025625# Displaying SIM Clock status if your phone supporting this saving power attribute ‘SIM Clock Stop Allowed’ this means you will get the best stick by time.

• *#7760# Manufacture code(MC).

• *#7780# Restore factory settings(RFS).

• *#8110# Software version for the nokia phone 8110.

• *#94870345123456789# Deactivate the PWM-Mem.

• *#92702689# Display= 1-‘Serial Number’, 2-‘Date Made’, 3-‘Purchase Date’, 4-‘Date of last repair (0000 for no repairs)’, 5-‘Transfer User Data’. To exit this mode you need to switch the phone off then start over again.

• **21*number# Turn on the ‘All Calls’ diverted to the phone number entered.

• **61*number# Turn on the ‘No Reply diverted to the phone number entered.

• **67*number# Turn onthe ‘On Busy’ diverted to the phone number entered.

• 12345 the default security code.

No comments: